Port-a-Vend portable vending trailer installation proceedure

Port-a-Vend
Portable Vending Trailer
For temporary vending locations
1-866-306-VEND

The following information will give you a step-by-step instruction on installing your portable
vending trailer on location. This process will take one person approximately 15 to 30 minutes.
This process will be reversed when you are removing the trailer from a location.

With vending machines loaded in trailer,
position trailer at the designated spot at the
location.

Step 1: Rotate and lower jacks. Turn jacks
until the weight of the trailer is not on the
wheels.

Step 2: Remove hitch pins that retain wheel
system and slide the wheel system out of the
base of the trailer. This is done on both
wheels.

Step 3: Lower trailer to the ground with the
jacks.

Step 4: Remove hitch pin that retains the
tongue of the trailer. Then remove the
tongue of the trailer.

Step 5: Remove the jacks, plug the machines
into a power source and its ready to make
money.

Step 6: Load the wheels, jacks, tongue, and
light set into your vehicle to store at your
warehouse until it is time to relocate the trailer.

Portavend@Yahoo.com